Measuring Tool Casting

Material:HT200-250
bending plate there are many types, I hit the right angle bending plate, bending plate table, bending plate test, T-slot bending plate, mainly for testing and machining parts in the fixture, the main use In the test, the vertical machine tools installed inspection, examination of the workpiece 90o angle

Ordinary bending plate the surface on the basis of a T-slot opening.
Materials used: HT200-300.
T-slot bending plate machine parts for a variety of installation, processing, special equipment, can also be used for machinery and equipment table

Cast iron square box structure, is a cavity cube with 6 working surface wich are made of cast iron or steel, one of the working face has a v-slot. High strength HT200-300
Square box test of the environmental conditions: normal temperature and humidity.

Cast Iron "X" Type Vee block
Material: HT250
V Groove is set on every surface
V Groove Width is set with v
Size:according to requirements

square block it is industry measuring tols
Widely is suitable the Tool shop, the Assembly shop for the machine-finishing, machine (examines) repairs a vehicle, of the measuring room and the precision sizing examination, the survey and the attrition. the straight measuring instrument material picks the HT200-250 high strength cast iron.

Magnetic square box and materials to use, very close to the square box with cast iron, the difference is that the magnetic part of the square box and the bottom of the V-groove with the magnetic field are such that the workpiece can be firmly fixed to the side boxes, easy to use.

Face the use of scratch inquiry process, the working surface of Machinable V-type, T type, U type and round holes, long holes and so on. Plate is used to detect the workpiece or celecoxib apparatus Datum Line. Flat-panel installation should be raised to the level of the load being evenly distributed in the fulcrum.